i am using carbide c++ 1.2.
whnever i am trying to build a project on any of the s60 versions its giving no rule to make target error.
in the case of uiq its working fine.
i also tried the solution that provided in this link http://wiki.forum.nokia.com/index.ph...nd_line_errors
but still the error is coming .pls help
Check by typing 'devices' in the command prompt if your intended SDK is set to default. you could try 'abld build winscw udeb' and see if it starts compiling.
Also more information regarding the installation of SDK, perl version etc can be helpful in understanding where the problem could possibly be.
By default its s60 itself and by using 'abld build winscw udeb' command also its giving the same error.
S:\sv3_ws\trial\group>abld build winscw udeb
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\EXPORT.make" EXPORT VERBOSE=-s
Nothing to do
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\WINSCW.make" MAKEFILE VERBOSE=-s
make -s -C \sv3_ws\trial\group -f "ICONS_SCALABLE_DC.MK" TO_ROOT=..\..\.. EPOCB
LD=..\..\..\EPOC32\BUILD\sv3_ws\trial\group\ICONS_SCALABLE_DC\WINSCW TO_BLDINF=.
.\..\..\sv3_ws\trial\group PLATFORM=WINSCW MAKMAKE
make -s -C \sv3_ws\trial\HELP -f "BUILD_HELP.MK" TO_ROOT=..\..\.. EPOCBLD=..\..
\..\EPOC32\BUILD\sv3_ws\trial\group\BUILD_HELP\WINSCW TO_BLDINF=..\..\..\sv3_ws\
trial\group PLATFORM=WINSCW MAKMAKE
Bareword found where operator expected at S:/epoc32/tools/perllib/params.pm line
461, near "New CParamItem"
(Do you need to predeclare New?)
Bareword found where operator expected at S:/epoc32/tools/perllib/params.pm line
466, near "New CParamItem"
(Do you need to predeclare New?)
syntax error at S:/epoc32/tools/perllib/params.pm line 461, near "New CParamItem
"
syntax error at S:/epoc32/tools/perllib/params.pm line 466, near "New CParamItem
"
Compilation failed in require at S:/epoc32/tools/perllib/args.pm line 19.
BEGIN failed--compilation aborted at S:/epoc32/tools/perllib/args.pm line 19.
Compilation failed in require at S:\\epoc32\tools\cshlpcmp.pl line 58.
BEGIN failed--compilation aborted at S:\\epoc32\tools\cshlpcmp.pl line 58.
make[1]: *** [MAKMAKE] Error 255
make: *** [MAKEFILEBUILD_HELP] Error 2
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\WINSCW.make" LIBRARY VERBOSE=-s
make -s -C \sv3_ws\trial\group -f "ICONS_SCALABLE_DC.MK" TO_ROOT=..\..\.. EPOCB
LD=..\..\..\EPOC32\BUILD\sv3_ws\trial\group\ICONS_SCALABLE_DC\WINSCW TO_BLDINF=.
.\..\..\sv3_ws\trial\group PLATFORM=WINSCW LIB
make -s -C \sv3_ws\trial\HELP -f "BUILD_HELP.MK" TO_ROOT=..\..\.. EPOCBLD=..\..
\..\EPOC32\BUILD\sv3_ws\trial\group\BUILD_HELP\WINSCW TO_BLDINF=..\..\..\sv3_ws\
trial\group PLATFORM=WINSCW LIB
make -s -r -f "\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW" LIBR
ARY
make[1]: \EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW: No such fil
e or directory
make[1]: *** No rule to make target `\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINS
CW\TRIAL.WINSCW'. Stop.
make: *** [LIBRARYTRIAL] Error 2
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\WINSCW.make" RESOURCE CFG=UDEB V
ERBOSE=-s
make -s -C \sv3_ws\trial\group -f "ICONS_SCALABLE_DC.MK" TO_ROOT=..\..\.. EPOCB
LD=..\..\..\EPOC32\BUILD\sv3_ws\trial\group\ICONS_SCALABLE_DC\WINSCW TO_BLDINF=.
.\..\..\sv3_ws\trial\group PLATFORM=WINSCW CFG=UDEB RESOURCE
Checking: ..\gfx\qgn_menu_trial.svg
Choosing...
Loading mif icons...
Loading file: ..\gfx\qgn_menu_trial.svg
Writing mif: \epoc32\release\WINSCW\UDEB\Z\resource\apps\trial_0xED8D446B.mif
make -s -C \sv3_ws\trial\HELP -f "BUILD_HELP.MK" TO_ROOT=..\..\.. EPOCBLD=..\..
\..\EPOC32\BUILD\sv3_ws\trial\group\BUILD_HELP\WINSCW TO_BLDINF=..\..\..\sv3_ws\
trial\group PLATFORM=WINSCW CFG=UDEB RESOURCE
make -s -r -f "\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW" RESO
URCEUDEB
make[1]: \EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW: No such fil
e or directory
make[1]: *** No rule to make target `\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINS
CW\TRIAL.WINSCW'. Stop.
make: *** [RESOURCETRIAL] Error 2
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\WINSCW.make" TARGET CFG=UDEB VER
BOSE=-s
make -s -C \sv3_ws\trial\group -f "ICONS_SCALABLE_DC.MK" TO_ROOT=..\..\.. EPOCB
LD=..\..\..\EPOC32\BUILD\sv3_ws\trial\group\ICONS_SCALABLE_DC\WINSCW TO_BLDINF=.
.\..\..\sv3_ws\trial\group PLATFORM=WINSCW CFG=UDEB BLD
make -s -C \sv3_ws\trial\HELP -f "BUILD_HELP.MK" TO_ROOT=..\..\.. EPOCBLD=..\..
\..\EPOC32\BUILD\sv3_ws\trial\group\BUILD_HELP\WINSCW TO_BLDINF=..\..\..\sv3_ws\
trial\group PLATFORM=WINSCW CFG=UDEB BLD
make -s -r -f "\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW" UDEB
make[1]: \EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW: No such fil
e or directory
make[1]: *** No rule to make target `\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINS
CW\TRIAL.WINSCW'. Stop.
make: *** [TARGETTRIAL] Error 2
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\WINSCW.make" FINAL CFG=UDEB VERB
OSE=-s
make -s -C \sv3_ws\trial\group -f "ICONS_SCALABLE_DC.MK" TO_ROOT=..\..\.. EPOCB
LD=..\..\..\EPOC32\BUILD\sv3_ws\trial\group\ICONS_SCALABLE_DC\WINSCW TO_BLDINF=.
.\..\..\sv3_ws\trial\group PLATFORM=WINSCW CFG=UDEB FINAL
make -s -C \sv3_ws\trial\HELP -f "BUILD_HELP.MK" TO_ROOT=..\..\.. EPOCBLD=..\..
\..\EPOC32\BUILD\sv3_ws\trial\group\BUILD_HELP\WINSCW TO_BLDINF=..\..\..\sv3_ws\
trial\group PLATFORM=WINSCW CFG=UDEB FINAL
I am using perl, v5.8.8.
Earlier it worked fine ie, whn codewarrior is installed in my system but i am using carbide.
after when i uninstalled codewarrior ,then both carbide and cmd mode starts giving error.
Forum posts: 463
Check by typing 'devices' in the command prompt if your intended SDK is set to default. you could try 'abld build winscw udeb' and see if it starts compiling.
Also more information regarding the installation of SDK, perl version etc can be helpful in understanding where the problem could possibly be.
Forum posts: 12
By default its s60 itself and by using 'abld build winscw udeb' command also its giving the same error.
S:\sv3_ws\trial\group>abld build winscw udeb
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\EXPORT.make" EXPORT VERBOSE=-s
Nothing to do
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\WINSCW.make" MAKEFILE VERBOSE=-s
make -s -C \sv3_ws\trial\group -f "ICONS_SCALABLE_DC.MK" TO_ROOT=..\..\.. EPOCB
LD=..\..\..\EPOC32\BUILD\sv3_ws\trial\group\ICONS_SCALABLE_DC\WINSCW TO_BLDINF=.
.\..\..\sv3_ws\trial\group PLATFORM=WINSCW MAKMAKE
make -s -C \sv3_ws\trial\HELP -f "BUILD_HELP.MK" TO_ROOT=..\..\.. EPOCBLD=..\..
\..\EPOC32\BUILD\sv3_ws\trial\group\BUILD_HELP\WINSCW TO_BLDINF=..\..\..\sv3_ws\
trial\group PLATFORM=WINSCW MAKMAKE
Bareword found where operator expected at S:/epoc32/tools/perllib/params.pm line
461, near "New CParamItem"
(Do you need to predeclare New?)
Bareword found where operator expected at S:/epoc32/tools/perllib/params.pm line
466, near "New CParamItem"
(Do you need to predeclare New?)
syntax error at S:/epoc32/tools/perllib/params.pm line 461, near "New CParamItem
"
syntax error at S:/epoc32/tools/perllib/params.pm line 466, near "New CParamItem
"
Compilation failed in require at S:/epoc32/tools/perllib/args.pm line 19.
BEGIN failed--compilation aborted at S:/epoc32/tools/perllib/args.pm line 19.
Compilation failed in require at S:\\epoc32\tools\cshlpcmp.pl line 58.
BEGIN failed--compilation aborted at S:\\epoc32\tools\cshlpcmp.pl line 58.
make[1]: *** [MAKMAKE] Error 255
make: *** [MAKEFILEBUILD_HELP] Error 2
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\WINSCW.make" LIBRARY VERBOSE=-s
make -s -C \sv3_ws\trial\group -f "ICONS_SCALABLE_DC.MK" TO_ROOT=..\..\.. EPOCB
LD=..\..\..\EPOC32\BUILD\sv3_ws\trial\group\ICONS_SCALABLE_DC\WINSCW TO_BLDINF=.
.\..\..\sv3_ws\trial\group PLATFORM=WINSCW LIB
make -s -C \sv3_ws\trial\HELP -f "BUILD_HELP.MK" TO_ROOT=..\..\.. EPOCBLD=..\..
\..\EPOC32\BUILD\sv3_ws\trial\group\BUILD_HELP\WINSCW TO_BLDINF=..\..\..\sv3_ws\
trial\group PLATFORM=WINSCW LIB
make -s -r -f "\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW" LIBR
ARY
make[1]: \EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW: No such fil
e or directory
make[1]: *** No rule to make target `\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINS
CW\TRIAL.WINSCW'. Stop.
make: *** [LIBRARYTRIAL] Error 2
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\WINSCW.make" RESOURCE CFG=UDEB V
ERBOSE=-s
make -s -C \sv3_ws\trial\group -f "ICONS_SCALABLE_DC.MK" TO_ROOT=..\..\.. EPOCB
LD=..\..\..\EPOC32\BUILD\sv3_ws\trial\group\ICONS_SCALABLE_DC\WINSCW TO_BLDINF=.
.\..\..\sv3_ws\trial\group PLATFORM=WINSCW CFG=UDEB RESOURCE
Checking: ..\gfx\qgn_menu_trial.svg
Choosing...
Loading mif icons...
Loading file: ..\gfx\qgn_menu_trial.svg
Writing mif: \epoc32\release\WINSCW\UDEB\Z\resource\apps\trial_0xED8D446B.mif
make -s -C \sv3_ws\trial\HELP -f "BUILD_HELP.MK" TO_ROOT=..\..\.. EPOCBLD=..\..
\..\EPOC32\BUILD\sv3_ws\trial\group\BUILD_HELP\WINSCW TO_BLDINF=..\..\..\sv3_ws\
trial\group PLATFORM=WINSCW CFG=UDEB RESOURCE
make -s -r -f "\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW" RESO
URCEUDEB
make[1]: \EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW: No such fil
e or directory
make[1]: *** No rule to make target `\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINS
CW\TRIAL.WINSCW'. Stop.
make: *** [RESOURCETRIAL] Error 2
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\WINSCW.make" TARGET CFG=UDEB VER
BOSE=-s
make -s -C \sv3_ws\trial\group -f "ICONS_SCALABLE_DC.MK" TO_ROOT=..\..\.. EPOCB
LD=..\..\..\EPOC32\BUILD\sv3_ws\trial\group\ICONS_SCALABLE_DC\WINSCW TO_BLDINF=.
.\..\..\sv3_ws\trial\group PLATFORM=WINSCW CFG=UDEB BLD
make -s -C \sv3_ws\trial\HELP -f "BUILD_HELP.MK" TO_ROOT=..\..\.. EPOCBLD=..\..
\..\EPOC32\BUILD\sv3_ws\trial\group\BUILD_HELP\WINSCW TO_BLDINF=..\..\..\sv3_ws\
trial\group PLATFORM=WINSCW CFG=UDEB BLD
make -s -r -f "\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW" UDEB
make[1]: \EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINSCW\TRIAL.WINSCW: No such fil
e or directory
make[1]: *** No rule to make target `\EPOC32\BUILD\sv3_ws\trial\group\TRIAL\WINS
CW\TRIAL.WINSCW'. Stop.
make: *** [TARGETTRIAL] Error 2
make -r -f "\EPOC32\BUILD\sv3_ws\trial\group\WINSCW.make" FINAL CFG=UDEB VERB
OSE=-s
make -s -C \sv3_ws\trial\group -f "ICONS_SCALABLE_DC.MK" TO_ROOT=..\..\.. EPOCB
LD=..\..\..\EPOC32\BUILD\sv3_ws\trial\group\ICONS_SCALABLE_DC\WINSCW TO_BLDINF=.
.\..\..\sv3_ws\trial\group PLATFORM=WINSCW CFG=UDEB FINAL
make -s -C \sv3_ws\trial\HELP -f "BUILD_HELP.MK" TO_ROOT=..\..\.. EPOCBLD=..\..
\..\EPOC32\BUILD\sv3_ws\trial\group\BUILD_HELP\WINSCW TO_BLDINF=..\..\..\sv3_ws\
trial\group PLATFORM=WINSCW CFG=UDEB FINAL
S:\sv3_ws\trial\group>
Forum posts: 463
You still didnt mention your perl. It seems to be quite a candidate from above
Forum posts: 12
I am using perl, v5.8.8.
Earlier it worked fine ie, whn codewarrior is installed in my system but i am using carbide.
after when i uninstalled codewarrior ,then both carbide and cmd mode starts giving error.
Thax for ur effort
Forum posts: 463
Read the release documents. They clearly specify perl v 5.6.1 !!
Forum posts: 26
I had the same problem until a few minutes back. Symbian_Neil's solution solved it
Forum posts: 463
Glad it helped