NewLC - On device debugging using USB cable - Comments

Re: On device debugging using USB cable

tiger4mobile — Sat, 03 May 2008 08:54:51 +0200

I got the answer.

At the time of launching TRK it will ask for to enable bluetooth, select NO for that and go to option->settings->connection and select USB from that.

For checking of which port device is connecting go to Control Panel -> system -> device manager -> Port. There u can see the device name attached to ur PC and with which port.
so at the time of debugging in device give the same port name in carbide.

Re: On device debugging using USB cable

eric — Fri, 02 May 2008 09:08:16 +0200

There is no major differences between both, except that USB is a little bit simpler. You can follow bluetooth instruction, just ignore the pairing/connecting stuff (and be sure your TRK is connected in USB mode.

On device debugging using USB cable

tiger4mobile — Fri, 02 May 2008 05:47:12 +0200

Can any one tell for on device debugging in Carbide C++ how to do setting for USB cable. Whatever link i got in net they are telling regarding bluetooth connection but i want to do through USB connection.